Acewell ACE-TS universal fuel sensor 0-100 Ohms

This fuel sensor fits directly into your motorcycle's fuel tank and displays the fuel level on your Acewell meter, with no need for complicated settings or wiring.

Connections specific to Acewell meters.

For Acewell meters with a 7-LED fuel gauge, the ranges are as follows:

0-10 Ohms: 7 bars (full)
11-20 Ohms: 6 bars
21-35 Ohms: 5 bars
36-45 Ohms: 4 bars
46-60 Ohms: 3 bars
61-75 Ohms: 2 bars
76-90 Ohms: 1 bar
91-100 Ohms: 1 flashing bar (reserve)

The sensor is installed in the upper part of the tank and requires a 40mm diameter hole (gasket included). Maximum measured amplitude is 160mm between sensor and bottom position. The position of the float on its rod can be adjusted to adapt the sensor to different tank shapes.