Carp remote control Iter ADVENTURE

With the Carpe Iter remote, control over 20 navigation applications, including Drive Mode Dashboard 2, OSMAnd, Locus, Google Maps and many more. Designed for Adventure and Touring riders, with its 3 LED buttons and joystick, you'll be in full control of your navigation.


Control over 20 applications with the same control scheme:

- Pan map (Up/Down/Left/Right)
- Zoom in and out
- Center location / Follow location
- Enable / disable rotation in direction of travel

Software to simplify connection and configuration:

- Easy configuration of the controller connection with the CARPE Controller application, which guides you through all the necessary steps
- Adjust and test joystick sensitivity by direction
- Configure button LED color and brightness level
- Start a HUD overlay whenever you want to adjust screen brightness, control media, adjust volumes and disable or activate the touchscreen
- Configure wheel sensor with automatic wheel size calibration via GPS or manual input
- Monitor your motorcycle's voltage

Specification data:

- Compatible with Android devices from version 5.1. For full compatibility with all features, we recommend at least Android 7
- Average operational power consumption: 0.013 A at 13 V max (BT connected, wheel sensor in use and 3 LEDs at maximum brightness)
- 3 mechanical buttons with RGB LEDs
- Magnetically centered HAL Sensor joystick with automatic calibration and 20 sensitivity adjustment steps per direction
- HAL Sensor joystick is calibrated every time the device starts up or wakes up from sleep mode (the user must NOT touch the joystick while the device is starting up or waking up)
- Device can operate with voltage as low as 5 V
- Read motorcycle voltage (displayed in application or using configuration mode with LED indication)
- Inactive mode control triggered by inactivity time, low voltage or manually in configuration mode
- Wheel sensor with detection down to 0.05 ms