FR
0 product
Total products 0,00 €
Shipping 0,00 €
Total 0,00 €
FR
avis clients

Klaxon motorcycle DENALI SoundBomb Compact 120dB + beam

118,70 €

En stock, expédié sous 24h.

  • Free delivery from 89€
  • Free returns within 30 days from €89
  • Payez en plusieurs fois
Klaxon motorcycle DENALI SoundBomb Compact 120dB + beam
118,70 €
  • Descriptif

    Installation instructions here

    Replace your original horn with the SoundBomb DENALI. No chance to go unnoticed with this sound alarm that is measured at 120 dB at 1 meter distance. Using an electro-pneumatic system, the SoundBomb emits a sound up to 4 times higher than a standard sound alarm.

    Supplied with a complete beam (relay and fuse 30A), this product is ready to be installed on all machines with flat sockets.

    - Klaxon electro-pneumatic motorcycle, 120 dB at one metre
    - Compact model, compressor and single-block warning
    - Operating voltage: 12V / 30 A
    - Dimensions (mm): L 137 x H 116 x P 86
    - 1.6 metre built with 30A relay and fuse
  • En vidéo

  • DENALI SoundBomb Compact 120dB motorcycle horn

    DENALI Reference: TT-SB.10000.B
    Installation instructions here
    Replace your original horn with the DENALI SoundBomb. No chance of going unnoticed with this horn, which is measured at 120 dB at a distance of 1 meter. Using an electro-pneumatic system, the SoundBomb sounds up to 4 times louder than a standard horn.

    - Electro-pneumatic motorcycle horn, 120 dB at one meter
    - Compact design, compressor and horn in one unit
    - Operating voltage: 12V / 20 A
    - Dimensions (mm): W 137 x H 116 x D 86
    - Relay included
    - DENALI code: TT-SB.10000.B

    Caution: This horn requires the use of a relay and must be connected directly to the motorcycle battery, securing the line with a fuse (see instructions above).
    Use of the Denali universal harness reference DNL.ELC.10000 (or a CANsmart for machines that can be fitted with one) is strongly recommended.
  • DENALI universal beam for Soundbomb horns (DNL.ELC.10000)

    DENALI part number: DNL.ELC.10000

    The DENALI universal wiring kit for SoundBomb horns connects Plug & Play to the blade connectors of the original horn. If the original horn is not equipped with a blade connector, the original connector must be replaced by a plug-in female connector.

    Designed for use with Denali SoundBomb horns, but can also be used with other replacement horns requiring a dedicated relay.

    - Plug & Play installation
    - Immediate use
    - Compatible with DENALI Soundbomb horns: Split and Compact
  • Caractéristiques

    Product type : Pneumatic horn
  • Avis clients

    AVIS CLIENTS
(0) My cart

Aucun produit

Continue shopping See my cart
Choisissez votre point relais
Produit ajouté au panier !
Create your account
Hello