Klaxon motorcycle DENALI SoundBomb Split 120dB + beam

Installation instructions here

Replace your original horn with the SoundBomb DENALI. No chance to go unnoticed with this sound alarm that is measured at 120 dB at 1 meter distance. Using an electro-pneumatic system, the SoundBomb emits a sound up to 4 times higher than a standard sound alarm.

Supplied with a complete beam (relay and fuse 30A), this product is ready to be installed on all machines with flat sockets.

- Klaxon electro-pneumatic, 120 dB at one metre
- Model "split", compressor and warning in two parts allowing easier integration on machines where the place is counted
- Operating voltage: 12V / 30 A
- Compressor dimensions (mm): W 116 x H 75 x P 76
- Dimensions of the horn (mm): W 104 x H 94 x P 86
- 1.6 metre built with 30A relay and fuse
- Tube connection between compressor and klaxon 90 cm

NB: for BMW, specific connectors sold separately

DENALI Reference: TT-SB.10100.B

Installation instructions here

Replace your original horn with the DENALI SoundBomb. No chance of going unnoticed with this horn, which is measured at 120 dB at a distance of 1 meter. Using an electro-pneumatic system, the SoundBomb sounds up to 4 times louder than a standard horn.


- Electro-pneumatic motorcycle horn, 120 dB at 1 m
- Compact design, compressor and horn in one unit
- Operating voltage: 12V / 20 A
- Compressor dimensions (mm): W 116 x H 75 x D 76
- Horn dimensions (mm): W 104 x H 94 x D 86
- Relay included

Caution: This horn requires the use of a relay and must be connected directly to the motorcycle battery, securing the line with a fuse (see instructions above).
Use of the Denali universal harness reference DNL.ELC.10000 (or a CANsmart for machines that can be fitted with one) is strongly recommended.

DENALI part number: DNL.ELC.10000

The DENALI universal wiring kit for SoundBomb horns connects Plug & Play to the blade connectors of the original horn. If the original horn is not equipped with a blade connector, the original connector must be replaced by a plug-in female connector.

Designed for use with Denali SoundBomb horns, but can also be used with other replacement horns requiring a dedicated relay.

- Plug & Play installation
- Immediate use
- Compatible with DENALI Soundbomb horns: Split and Compact