Additional light kit DENALI D2 LED TriOptic

Any doubt about the Denali lights you need? See our comparison beams / dimensions below:
FACKGROUND
COMPARAISON DIMENSIONS

The additional light kit DENALI D2 is the one that offers the best compromise between additional light, increased visual signature and value/price ratio, so it will suit the majority of users.

Delivered with its two sets of lenses (system TriOptic), you have 3 different light beams in order to adapt the kit to the conditions you will face: the "spot" configuration offers narrow and distant lighting (up to 160 meters). If on the contrary, you need a wider beam at the expense of depth, the "True-Hybrid" configuration will be perfect. Finally, compromise of both, the "Spot-Hybrid" solution will be a perfect intermediary between depth and width.

Including a complete wiring beam with waterproof relay and switch, this kit DENALI is ready to receive DataDim Dual Itensity Controller which will allow you to vary the lighting intensity (0 - 50% - 100%) for even more flexibility in the use of your additional lights.

Combining robustness, flexibility of use and manufacturing quality, additional light kits DENALI are the best products we can offer you now. Do not hesitate to contact us for more details on the solution adapted to your use and your machine.

LEDs : 2x leds Cree XPL HI 10 Watt
Consumption 1.6 A
Maximum beam length (Spot) 160 metres
Maximum beam angle (True-Hybrid) 50 meters
Total luminous flux : 2190 lumens
Wiring : Complete beam with waterproof switch included
DataDimTM Yes
Operating voltage 12 DC Volts
Boitier : Totally waterproof DrySeal (submersible) with CE marking
Fixed : Stainless steel pier with M8 screw drilling
Dimensions of optical blocks : 5,58 x 6,09 cm

Installation instructions here

Not sure which Denali lights are right for you? Check out our beam/size comparisons below:
BEAM COMPARISON
SIZE COMPARISON

The DENALI D2 auxiliary light offers the best compromise between additional light, enhanced visual signature and value for money, making it suitable for the majority of users.

Sold individually, without beam or accessories, to replace a damaged light or to reinforce your existing equipment. The beacon is pre-wired for plug&play installation on Denali beams. Split Y cables are sold separately.


LEDs: Cree XPL HI 10 Watt LEDs
Power consumption: 0.8 A
Total luminous flux: 1095 lumens
DataDim™ compatible: Yes
Operating voltage: 12 Volts DC
Housing: Fully waterproof DrySeal (submersible) with CE marking
Mounting: Stainless steel bracket with hole for M8 screw
Optics dimensions: 5.58 x 6.09 cm
Cable length: 60 cm (supplied with socket and 3 bare wires for adaptation)

This DENALI 2.0 Premium wiring kit includes high-quality waterproof components designed to power two DENALI 2.0 LED lighting modules.
The cables feature discreet, waterproof connectors and high-quality molded wire to prevent moisture from entering the system. The kit includes a completely sealed and waterproof switch, designed to withstand extreme conditions.

The kit also features the intelligent HotSwap ™ design, which enables effortless switching from the standard relay to our DataDim ™ dual-intensity controller (sold separately).

The kit contains:

- Premium cables
- Single-intensity relay
- Waterproof DrySeal™ On/Off switch
- Ø22.2mm handlebar mounting bracket
- Ø25.4mm handlebar mounting bracket