Motorcycle speed controller Bike It GO CRUISE 22 mm

On long journeys, maintaining a constant speed on a motorcycle is a tiresome and tiring exercise. The cruise control lets you reduce forearm strain by maintaining a set speed for you.

The GO CRUISE is disconcertingly easy to use and effective, and only takes a few seconds to set up:

1- Install the silicone ring at the base of your throttle to ensure a good grip.
2- Gently open the Go CRUISE and place it on your handlebar, over the silicone ring, in the vertical position (deactivated).

- Model for 22 mm handlebars and cover up to 32 mm diameter, also available in 25 mm version
- If you have heated grips on your handlebars, the model for 25 mm handlebars is recommended
- Matte black finish

Using the GO CRUISE :

1- Accelerate to the desired speed, the GO CRUISE follows the movement of your handlebars.
2- Once the speed has been reached and stabilized, use your index finger to lower the GO CRUISE until it is in contact with the front brake lever (activated).
3- To disengage the GO CRUISE, simply accompany the return of the throttle or raise it with your index finger.

NB: Do not use the GO CRUISE in urban or high-traffic areas, or when your speed requires frequent adjustments.