DENALI LED FLUSH indicators (ALG.001)

DENALI part number: ALG.001

These unique turn signals have been designed to create the smallest possible flasher that can still emit a significant amount of light. Each flasher features two high-power 3-watt LEDs surrounded by a durable cast aluminum housing. Don't let their small size fool you, these turn signals are super bright and feature an angled lens design that makes the bright orange LEDs completely visible from the side of the vehicle in addition to the front.

These turn signals can be flush-mounted on any flat surface, and can also be used as auxiliary turn signals by adding them to your front fender, hand guards or suitcases.


Note: Load resistors are required to prevent overloading when switching from a traditional incandescent flasher to an LED flasher. For a 21W flasher unit, a 10 Ohm resistor is recommended. For a 10W control unit, a 20 Ohm resistor is recommended.

Features:

- Flasher size: 36.8mm x 18.5mm x 14mm
- LED: Two per flasher, Flip Chip C3535 3W
- Color: Orange
- Power: 6 Watts per flasher (12W Pair)
- Voltage: 12V DC
- Waterproof: IP67

Kit contents:

- Turn signal (x2)
- Set screw M5x20, DIN913 (x2)
- M5 Nylock nuts, DIN 985 (x2)
- Connectors (x4)