Heated motorcycle gloves Gerbing XTREME XRL 3.0 + Kit 2 batteries/charger Gerbing 7V 2600 mAh

Discover the Gerbing XTREME XRL 3.0 heated motorcycle gloves, the evolution of the Gerbing XR12 and XRL 1st and 2nd generation heated gloves.
The XRL 3.0 2023 model has been further improved with a new XTREME heating system that provides even more warmth, and still the possibility of connecting your gloves by wire to the motorcycle battery for an unlimited period, or adding 7V or 12V batteries for your daily rides or if you are resistant to wires.

100% leather, they offer the best heating on the market, and the heating system is guaranteed for life.
Lined with Thinsulate, they feature a waterproof Hipora membrane.

Gloves sold with 2 batteries 7.4V 2600mAH + Gerbing charger for autonomous operation.
To run them on your motorcycle battery, choose the pack with Gerbing 12-Volt Battery Cable offered on the site.

Technical specifications of Gerbing XRL 3.0 heated gloves:

- Material upper hand: soft goat leather
- Palm material: goatskin leather and textile reinforcement for a good grip
- Heats fingers all the way to the tip, hand doc and thumb
- Protective shell on top of the hand: comfortable and shock-resistant in the event of a fall
- Waterproof and windproof thanks to Hipora® membrane
- Thinsulate® insulation and soft lining for added comfort and warmth
- Visor wiper on left thumb
- Reflective piping
- Reinforced fingertips
- Long cuff
- Tactile gloves
- 3 temperature settings via button on glove cuff
- Wrist pocket in each glove for Gerbing batteries
- Lifetime warranty on heating elements
- Connectable to any 12V vehicle socket (motorcycle, quad, snowmobile...)
- Heater brand that has sponsored the most expeditions to the North Cape in winter (down to -30°C)
- Heated products ecosystem: you can connect your gloves to under-jacket, under-pants and heated socks to make sure you're warm all over your body.

WARNING: pre-2020 12V heated gloves are not compatible with these new batteries. For older generation gloves, please use the old 12V 1200/1400 battery kits. Don't hesitate to contact us if you have any doubts.

IXTEM MOTO tipBe very careful when choosing your batteries if you opt for battery heating depending on your use: 7.4V batteries are recommended for short or urban trips, while 12V batteries are recommended for long trips with temperatures close to 0 or negative).

Technical specifications of Gerbing 7.4V 2600 mAh glove batteries + charger:

- Very practical for your short daily trips and for temperatures that don't drop below 0°C.

- Lithium-Ion battery in protective case
- 7.4V, 2600 mAh battery
- 3 heating levels (directly on glove button)
- Autonomy: between 2h30 (max heating) and 8h (min heating)
- Weight: 100g/battery
- Size: L 6.7cm x W 3.5 cm x D 1.8 cm
- Mains charger with cable for charging each battery
- Charging time varies according to outside temperature. Charging may be reduced if outside temperatures are very low and batteries are unprotected. Below 5°C, the battery will only produce 80% of its power.

Discover Gerbing XRL heated motorcycle gloves, the evolution of the famous Gerbing XR12.
The XRL 3.0 2023 model has been further improved with a new XTREME heating system that provides even more warmth, and still the possibility of connecting your gloves to the motorcycle battery for an unlimited period, or adding 7V or 12V batteries for your daily rides or if you're resistant to wires.

100% leather, they offer the best heating on the market, and the heating system is guaranteed for life.
Lined with Thinsulate, they feature a waterproof Hipora membrane.

Self-contained batteries are sold separately, unless you purchase a glove + battery kit (see proposal on our site).

Gloves supplied on their own, without battery cable kit or stand-alone battery. These gloves can't be used on their own, so you'll need to purchase a kit or add a battery cable or stand-alone batteries and 7V/12V charger.

Technical specifications of Gerbing XRL 3.0 heated gloves:

ATTENTION: if you use XRL 3.0 gloves with an old Gerbing LINER jacket (before 2020), please contact us before purchasing.

- Material upper hand: soft goatskin leather
- Palm material: goatskin leather and textile reinforcement for good grip
- Heats fingers all the way through, hand doc and thumb
- Protective shell on top of the hand: comfortable and shock-resistant in the event of a fall
- Waterproof and windproof thanks to Hipora® membrane
- Thinsulate® insulation and soft lining for added comfort and warmth
- Visor wiper on left thumb
- Reflective piping
- Reinforced fingertips
- Long cuff
- Tactile gloves
- 3 temperature settings via button on glove cuff
- Pocket in each glove at wrist level for Gerbing 7.4V or 12V batteries (sold separately, see kits on site)
- Lifetime warranty on heating elements
- Connectable to any 12V vehicle socket (motorcycle, quad, snowmobile...)
- Heater brand that has sponsored the most expeditions to the North Cape in winter (down to -30°C)
- Heated products ecosystem: you can connect your gloves to an under-jacket, under-pants and heated socks to make sure you're warm all over your body.

Gerbing XTREME XRL 3.0 gloves use Microwire Pro® Xtreme technology. This patented system comprises hundreds of Teflon-coated stainless steel filaments sewn into a fabric embedded in the gloves. This technology is the most durable and effective over time, as the steel filaments are virtually unbreakable (the steel wire can stretch and shrink by 30%), do not wear out, and heat up very quickly (10 seconds after connection).
Model 3.0 2023 offers even more efficient heat than the XRL and XRL 2.0 versions.

If you decide to add stand-alone 7V or 12V batteries:
- battery charge time varies according to outside temperature and batteries used.
- charging may be reduced if the outside temperature is very low and the batteries are unprotected.
- below 5°C, the battery will only produce 80% of its power.

This kit, comprising 2 batteries + Gerbing charger for Gerbing products, will enable you to use your heated motorcycle gloves in a stand-alone wireless version (XTREME XR EVO, XTREME DEFENDER, XRL and XRL 2.0, XRS, XRW and GT).

WARNING: pre-2020 12V heated gloves (XR12 in particular) are not compatible with these new batteries. For older-generation gloves, use the old 12V 1200 battery kits. Don't hesitate to ask us if you have any doubts.

Very practical for your short daily trips.

Charging time varies according to outside temperature. Charging may be reduced if the outside temperature is very low and the batteries are not protected.
Below 5°C, the battery will only produce 80% of its power.

Autonomy given as an indication, depending on the heating level chosen: between 2h30 and 8h of autonomy, which is far superior to the batteries of competing brands of heated gloves.

Technical specifications:

- Lithium-Ion battery in protective case
- 7.4V, 2600 mAh battery (competitors' batteries are generally 2400 mAh, and therefore offer shorter autonomy)
- 3 heating levels (directly on the glove button)
- Autonomy: between 2h30 (max heating) and 8h (min heating)
- Smaller and lighter than previous batteries, for greater lightness on your wrists: 116g per battery
- Size: L 7.2cm x W 4.2 cm x D 2.2 cm
- Mains charger with cable for charging each battery